Showing posts with label motorcycle. Show all posts
Showing posts with label motorcycle. Show all posts

Thursday, July 5, 2012

Its back....

Maybe about 5 years ago or something my brother Jason Tiedeken and I wanted to build something to race Roland Sands ( our boss at the time and super fast AMA 250cc national champ) and Rodney ( fabricator and designer at Roland Sands Design also fast 1000cc road racer) to a little inter-company race called the "Canyon Carver Challenge"

All the bikes must be 500cc and less and " MUST BE BUILT BY THE RACERS", anything goes just as long as it can race in the canyons and not crash, mostly because we need you to work because the company relies on everyone so heavely and we can't have you crashing.

So the race was on, Roland started by modifing a Buell Blast 500cc in to a custom little road racer....

There was one rule also .....

You were not able to work on it at work or by paid employees not involved in the race... which for my brother, Rodney and I isn't even an option but Roland had the employees to do so, so we had to call him out a few times on that.

Rodney decieded his beast of furry would be a mid 1980s Honda XR500 which started to look cool and all super motoed out once he started chopping in to the frame.

I wish I had pictures of some of these old beasts.

My brother did the design of this creature and I helped team up on the build to fab and weld. The creature ended up being an odd ball due to its odd motor choice.

 It was a Honda cb360, these little motors have a good firing order and are very little compact twin side by side cylinder engines that just push enough power to get your fat girl riding the bike up to street speeds of 45mph and nothing more...

My brother Jasons design
The Canyon Carver Honda Turboed CB360
Back in the day when I worked at Edelbrock, I made these stainless turbo pipes on the Pines Mandrel bender. you can see the little 10mm turbo behind the motor kind of...

some of the detail on the front end and how the steering uses links

I like looking at my welding from years back and compairing it to my welding today
Still got it.

This is the side view of the where the center stand needs to go.


Jasons solidworks center stand down

and up

The front end needs to be a bit stiffer so I am going to make this front end support while its here at the skunkworks.

I will get in to more details about the bike in the future, but this week I have to hammer down and make the front end support and the trackstand before he arrives at my shop next week so I have to get to work....

Thursday, December 22, 2011

Discovery Channel

In the good old days, some years back I was on a few Discovery Channel shows.

I happened to run across this one tonight while surfin the web.

Blake and Jake are in there too, Blake and I were both new to California while filming this...

Had to capture the screen shot for the blog, a must have.
Clean cut back in those days

Imagine being a kid taken from your cold Minnesota home and thrown in front of a TV film crew in warm & sunny Southern California a week later and told to not get in to trouble.....

Yeah right, it was only the start of the fun for years to come....

Its a long show but you can fast forward thru that dude Billy... ha ha 



There is the complete bike with those pipes I am still proud of.
Dylan and I did them in like 4 hours because it was a rush


Maybe someday I will dig up some of the other TV shows and post them..

Enjoy 

Saturday, November 12, 2011

A day in the life.......

Somedays when I move about my day to day life, I never really stop and think about what I do and how much fun its been the last 5 or so years...

Some times I get the chance to look at it from a whole different prospective and see how it looks from a different way and it makes me smile...

This video is a quick view of the BRD Electric Motorcycle  that I did some prototype work on a few months ago ( older blog post ) such as the aluminum skid plate and display stand, I don't appear in the video but it doesn't even matter to me, I was there with all those amazing designers, craftsman and thinkers and in the end the results with the project were amazing and I thank them for letting me be a part in the fun.

MLS has arrived and is here to stay, the San Francisco Bay Area is truly an amazing place for thinkers and builders of all kinds...


BRD RedShift from Sam Erickson on Vimeo.

Sunday, August 7, 2011

Holy $#!+ where have I been.....

July at MLS is always a mad month for many reasons and so this is my complete July post in a nut shell...

1.Interbike is coming up
2. New product releases for 2012 for various companies
3. Prototype medical stuff
4. Bike Expo in San Francisco is coming up
5. Doing a Kickstarter.com grant for the 120 mph Speed bicycle project for filming
6. Working with 2 electric motorcycle companies
7. Designing home decor and gardening products for a few new companies
8. Working with a green company that produces generators that run 100% off of wood chip and biomass
9. Doing R&D machines for Clorox and its brands
10. Making various research projects for donut making
11. Still making more designs for the video game console project
12. Threw MLS prom at the machine shop
13. Getting ready for an art show coming up in a week, here in Oakland.
14. Also pulled a high speed chase with the cops for fun.... first time I have gotten caught.... sucks..... $$$$ :(
15. Working in LA and helping my brother on the turbocharged Honda race concept project
16. Its summer and you know how it goes... This is my first full Oakland summer and its been amazing with all the stuff to do and people to meet. It reminds me of back in Minneapolis with September weather, but all year round.
17. Almost forgot - Had personal lunch with famous designer Pierre Terblanche who designed all the Ducati motorcycles for the last like 15+ years, kinda stoked me out to say the least.

so where do I even start....

How about the fun stuff.... wait its all fun.....


This blurry pictures seems to stoke me out so much - its my summer and its been a blur of good times.
Matt leading the cruz on his custom Traffic cross bike to the hidden lake in the Oakland hills. Swimming at midnight is EPIC after a long ride!!


The new MLS Laboratory Home decor line will be coming out soon...
Made from recycled Lab materials and goodies these should stoke out your mom and have her asking for more. I bend them up on the big 90 ton press shown in the MLS video and the flowers are not included.


This is Jay (Chemical Engineer/designer/good looking smart girl) and myself hanging out after our meeting at All Power Labs in Berkeley. This company designs, builds and test a system called Gasifiers, which in a nut shell - take wood chips, chars them, extracts the gases from the charring process then uses that to run a natural gas engine. Running completely 100% on wood chips - sooooo cool to see it all happen.

This is one of the prototype systems that gets tested around the clock with various different things, if you ask them what they have run in the machine other then wood chips, this list will go for days, they have even run cigs for a full tobacco running gas engine you could drive a car with. That is Abrim the Fabricator/Shipping bitch standing in the blue hat.


I spend about 60+ hours a week working in my shop and other shops, but every once and a while I just have to shut it down and relax. we made a Santa Cruz run to swim in the river with the friends, Mr. Poe the dog is always down to relax it seems....?


Don't feed me coffee at 10 PM or else you will have a set of bars to ride down the street to the local bar for last call.


For real don't do it, now the 1938 Schwinn New World is a racing machine in under an hour.

PROM  at Monkey Likes Shiny -  "a moment in time" theme prom

The idea was to dress as a couple in a matching period correct clothing, we went as Steampunk....
My lovely dates for the night - Louise Chen and Mr. Poe
I fired up the sheet metal press and made her a fan out of aluminum using a clear plastic protractor in the middle so she could measure the degrees.
The punch was so spiked it almost evaporated.... need I say more
Thats Matt up front dancing to Kenneth's hit single " Girl check your signal" 
We had a list of celebs show up which stoked me out, also a live performance from  Kenneth Ronquillo and with over 70+ couples attending, the MLS headquarters was hopping with fun. When no one wanted to leave because of all the fun, I decided to take things in to my own hands by doing a 4th gear burnout and donuts on the dance floor with my dirt bike, in my own place destroying the hardwood floors and smoking the place out ( please don't tell the landlords) 



This is the Show coming up in Oakland if your in the area 
Also I have asked Mike Cleaver of Cleaver Bikes to join me in displaying some oddness brewed in Oakland.

To finish up this post I think the electric motorcycle will do the trick.

Jeff Sand of Sand Studios contacted me about doing some odd fab work on his top secret project.
The idea was to build a concept 100% electric motorcycle that looks good and rides even better.

Using his odd  1 to 1 scaled blue prints and no numbers given ( all by eye ) I some how made the bash guard out of 1/8 thick aluminum all cold worked on the big press and all my sheet metal tools. With little to no time left before the date to unveil I put the last minute polish on the bash guard ( its the aluminum part around the orange battery box, it protect the batteries from stuff hitting the frame, batteries or underside of the bike) I receive an email from him asking for more things to be made. This use to be my life doing this last minute BS when I was fabricating on air for Discovery Channel shows and also when I was working for Roland Sands Design, so to say the least I don't really even get upset or frustrated like most people do when this stuff comes in hours before the big event. 
The email said " hey make this stand for the bike and make it pretty" 
BAM!!!
done, the only problem is now my track bike only has one grip because I put the other one on the handle for the stand as you can see in the lower left of the picture. 
The photos is in Derek's shop in San Francisco which is sooooo sick, its called Moss Machine and they build some neat stuff there, even parts for the cable cars in San Francisco.
This photos is like taken an hour before we were to show the bike to a fully packed press release.
The BRD Redshift Electric Motorcycle with my bash guard left in the raw aluminum
It got painted black for press release. 
If you want to read more about it here is some info from the press release
 MX action  or  for some cool photos from the night( pictures )


Thanks everyone - This July has been fun !!!!!

Friday, August 20, 2010

old camera phone picts

I ran across this old photo of the first days of building the Pabst dragster years back. I think I was just out of high school when I started the build.

From This ......



To this a few months later ....


If you want to read the magazine article heres the link to Hot Bike Magazine

Sunday, June 6, 2010

Vintage

While moving I found some good old stuff in boxes.

Check it, this is like 2002 or something


These are some little chopper motorcycles we built for people using Honda Elite motors. They were so much fun cause I  wasn't old enough to drive but I could ride a scooter, by using the Honda Elite it had a title for a scooter.

The one my brother is riding was a customers bike, the one I am on was personal ride with the money tank and little hayes disc on the front. It was more BMX bike then anything. 

Well, This is where it started 
Suzuki 1979  GS550
My brother and I first built a single sided swing arm and put the 15 x 11.5 inch Mickey Thompson Drag slick on the back, then we had to build some pipes and an intake. 
This was a sketch of a concept of the pipes which we never did, it ended up being myself with a 30 pack of Hamms beer on a Friday night at the shop. I never figured out why the pipes were so odd looking once they were done, some how they bolted back up if you took them off. The pipes ended up being 4 in to 2 with flame shooters.

We cut the tank for the down draft carbs to sit in the pocket, its kind of a cool picture with the drawings my brother did. 
This bike almost killed me so many times, even while we were filming the Discovery Channel Show Biker Build Off, the tire only had like 10 psi so it would roll over when your turned, if you put any more pressure in it, it became to square to lean the bike around a turn. 
So with so little pressure in the tire, when she would start hopping it was like riding a out of control beach ball at 75+ mph!

Wednesday, January 20, 2010

The little machine that could.

Here is a picture from a photo shoot I did a while back. I was doing a burnout downtown Malibu for a European magazine.

The bike was built for Adam Stark, It took me about 6 months to finish it up. It makes a little under 100 horsepower and doesn't have a problem spinning the tire, not bad for a Harley Sportster.


Thursday, November 12, 2009

The good old days........

Well, I think I was like 16 or 17 when I first seen the BIKER BUILD OFF - Discovery Channel shows. I was pumped, then the show BUILD OR BUST came out on Speed Channel....

I remember the intro to the show was kinda like this one, but its close to this one so you get the idea.....



I was in Cleveland doing my Aerospace welding school and 18 years old when I finished it up. I returned to Minneapolis, a few months later I recieved a phone call on my drive home from my newer job, the call was from Russell Mitchel of Exile cycles asking if I would like to be the fabricator for Exile cycles.Oh, and the twist was there was 2 weeks to move all my tools and stuff from Minnesota because Discovery wanted to film the next Biker Build Off against Billy Lane......  

Its funny to watch those old videos and remember what I was thinking or doing at the time........

Never expected to end up where I did........... Makes me Smile

Thanks goes to Jake, Dylan, and the crew for making it happen for me.....

Monday, November 2, 2009