Showing posts with label Stayer Track racing. Show all posts
Showing posts with label Stayer Track racing. Show all posts

Monday, August 20, 2012

Spinning ......

The last year of work has really slowed down all the fun personal projects around the shop that normally I would be doing, but on the other hand this year has been amazing for working on projects that may and will change the world.

From Meka Robotics crazy prototypes, Google madness, Boeing projects for the new 787 Dreamliner, Clorox Research stuff, USA Government projects, LightSail Energy, All Power Labs Gasifier crazyness, and now RedBull things..... Overall its a year to smile about.

I get a lot of emails asking about my projects and why I take so long building them.... That list above is the reason.... and its also the reason that makes better at what I do and think about things in a new light.

LightSail Energy is a company located in Berkeley and has a crazy green energy project that I have been stoked to help out on, I have been helping out doing some aluminum Tig welding.

The project is very neat in concept -
In a nutshell, its an " air battery"
the system runs off peak hours to compress air when electricty is cheap, then during the day when the grid needs power, the air compressor runs backwards using the stored air to turn it and it becomes an motor to turn the electrical motor which then becomes a generator of electrical power to sell back to the grid during demands.

The neat part is that all that heat generated in the compressor is captured with mists of water which can be used. Its a really rad system and very neat to look at.


I decieded this would be a perfect trade to get some help on one of my projects as a work for work exchange for my welding. The Speed Bike is still waiting on a front hub.....  So one of the machinist over at Lightsail named Liam decieded to help me out for the trade and spin the hub out after hours.

The Haas ST30 CNC lathe is perfect for the job


This is Liam doing all the layout and setup.
This hub is a tricky one....

Just hoggin the profile of the hub

sometimes you do some changes along the way


Spinning the finish profile of the hub on the outside.
Still a lot of weight reduction that needs to happen in the next few machine passes.

This gives you an idea of what the hub looks like and how it mounts

The hub makes some rad chips, which made the " Chip of the Day" in the Lightsail window



Just had to make a video of the prototype hub being made.




                          PedalFest - Oakland, CA  at  Jack London Square
This last weekend was the Oakland Jack London PedalFest
I was given a booth next to Jen at New Belgium Brewrey, so I brought the fleet of machines

There was no way that the WiskeyDrom was going to be there and I wasn't going to ride it.
This is the bike I just did for New Belgium that you will see this week after the photoshoot.

So a challenge went out via text message to Greg Minnaar to come race me....
So he showed up.... ready for the beach with his sandals and beach gear on

World Champ Downhill Mountain biker Greg tried all the bikes.... His lady Laila watching from the stairs leading in to the track.

even the kids little Schwinn from the 1960s

And this thing what ever it is.....
Pedalfest photos by Jon Suzuki

This was built by some guys up in Santa Rosa, CA with the help from New Belgium.
They call it the SpruceDeuce and its can go from land to water for a race located in northern California
Check it out - some good guys Krank Boom Clank

Thursday, June 9, 2011

Here we go...

Well, its time to start! This is going to be an odd ball so come along for the ride.

The idea concept came to me about a year ago after reading about "Mile a Minute Murphy" and his quest to ride a bike 60+ MPH in 1899 to promote the railroad, really the bike drafting off the rear of the train was just to get people to notice how fast and smooth the train could travel. They put down a lot of cash to build the 2 miles that Murphy would ride, a special straight section of track with smooth wood down the center for the bike to ride on.


The twist - develop a project that doubles that record and doubles everything used for the record, everyting from the design of the bike to the gear the rider uses.

I know your asking yourself " 120 mph on a bike !", its hard and so thats why we have a film crew!


So, I got on the phone with Peter Gilbert at Cane Creek and because everyone at Cane Creek is rad, they asked what do you need and how fast do you need it. Theres never been a project that Peter and his crew at Cane Creek have let me down on, there always seems to be wheels, headsets, shocks and stickers in the mail that day headed for my shop for my concept projects. I can't say a single bad thing about them or their products.




Next after locking in the parts I needed, was to go to the best design engineer I know - My brother Jason Tiedeken. The dude is off the chain when it comes to thinking outside the box and getting people to love it all. Hes got enough experience and education for a whole group of people plus why not have him design this machine, he is an engineer and my brother. Plus hes a hell of a bicycle designer.

A concept downhill project similar to the VPP of later years
 my brother Jason Tiedeken designed back in I believe 1999 or so
welded by Peacock Groove - Erik Noren in Mpls,MN


Ok, stop for a second because I am getting pumped posting this.

Ok, I am back

So the concept design made my jaw drop, something no one has ever seen, so different, so future, so sleek, so top secret I can't show you until its done. If any of the big dogs out there see this before its done you might see Lance's TT bike look a little different next year.
My new section of my shop devoted to welding bicycle frames
I seem to find my zen in this corner of the shop.
And for you kids out there 650 front 700 rear

You may have seen posts from me over the last months talking about building this odd project, and I will say its taken a lot longer to start then I planned but then again I wasn't expecting my life to change so much in the last year an a half as well, so come along for the journey of a completly 100% concept project that will twist your mind and have you asking for more!

Enjoy


Thursday, October 29, 2009

Stayer Track Racing

Here it is kids, take notes! Very crazy and dangerous sport. Check out the bikes with the forks backwards! It allows the rider to get closer to the motorcycle and changes the geometry of the bike's front end to add some trail without adding rake.
The bikes in the video are hitting 55 + mph

Expect something to roll out the shop door in the next few months related to a Stayer bike!!!